Ulanzi S006 Suction Cup Mount TB15
Couldn't load pickup availability
- 1. Heavy-Duty Support for Pro Gear: Built on a rock-solid triangular structure to hold heavy-lens cameras securely in place, supporting loads of up to 3kg.
- 2. Holds Strong Even on Bumpy Roads: Equipped with a vacuum pump for powerful suction, proven to stay firmly mounted through 2-hour vibration tests at 130 RPM.
- 3. 360° Adjustment for the Perfect Shot: Free horizontal and vertical adjustment with an integrated locking knob enables precise, stable, and droop-free positioning.
- 4. Modular Design for Total Flexibility: Mix and match suction cups and brackets to adapt to any shooting scenario, both inside and outside the vehicle.
- 5. 1/4” & 3/8”, Expand Without Limits: Multiple standard mounting holes ensure wide compatibility with accessories and professional rigs.
Enjoy 2% OFFEvery Purchase Join for Free,Save for Life
Heavy-Duty Support for Pro Gear
Built on a rock-solid triangular structure formed by the suction cup and bracket, it delivers unmatched stability and keeps heavy-lens cameras securely in place.
- Supports 3kg Load
* While driving at speeds up to 80 km/h, the Max. load is ≤3kg. Use of overly tall or extended accessories (e.g., extension rods) is not recommended, as it may pose safety risks while the vehicle is in motion.
Holds Strong Even on Bumpy Roads
Equipped with a vacuum pump for powerful suction, the mount stayed firmly in place even after a 2-hour vibration test at 130 RPM.
- Horizontal Suction: 18kg
- Vertical Suction: 12kg
*Data from Ulanzi Lab. Actual performance may vary based on actual use.
Modular Design for Total Flexibility
- Roof-mounted Angle
- Side Car Door Mounts
- POV Shot
- Side Portrait Shot
*For heavy gear, it is recommended to use three or more suction cups, with multiple magic arms connected to extension points to form a stable triangular support structure.
360° Adjustment for the Perfect Shot
Free horizontal and vertical adjustment with an integrated locking knob for stable, droop-free positioning.
- 90°
- 360°
Limitless Expansion with Dual-Thread Mounting
Multiple mounting holes offer wide compatibility for accessories and rigs.
- Suction Cup
1/4” + ARRI Locating Holes x 5
3/8" + ARRI Locating Holes x 3
Double-headed magic arm fits a wide range of cameras and accessories.
- Double-Ended Magic Arm
1/4” + ARRI Locating Holes x 2
3/8" + ARRI Locating Holes x 2
-Recommended Load: ≤3kg
*Data from Ulanzi Lab. Actual performance may vary based on actual use.
Suction Cup Installation & Removal Guide
1. Press the suction cup firmly onto a smooth surface until full contact. Pump the valve repeatedly until the red line retracts into the pump – this indicates a secure seal.
2. Lift both “OPEN” tabs to release air and detach the suction cup. The valve will pop back out when the seal is broken.
*Before use, ensure the mounting surface is dry, flat, and smooth, and that the bottom of the suction cup is clean and undamaged. Dust or debris may weaken the suction. Only attach to smooth, flat, non-porous surfaces. For safety, check the suction every 4 hours when static, and every 2 hours when in motion.
Specifications
Suction Cup
Brand: Ulanzi
Model: TB15
Material: Aluminum Alloy + TPE Suction Cup + Plastic
Dimensions:11.1*13.8*5.4cm
Weight:0.3 kg
Dynamic Load (at 80km/h): ≤3kg
*Manually measured weight and size may not be accurate.
Included:
Suction Cup*1
Specifications
Double-Ended Magic Arm
Brand: UlanziModel: TB15
Material: Aluminum Alloy + Plastic
Dimensions:21*4.8*3cm
Weight:0.3 kg
Load Capacity: 3 kg
*Manually measured weight and size may not be accurate.
Included:
Double-ended Magic Arm*1
- Choosing a selection results in a full page refresh.