Create Apple-Style 3D Floating UI in DaVinci Resolve Fusion

Create a floating glass card in Fusion with a shared matte, tracked perspective, and hand interaction. See where configured D200X controls fit into the workflow.
ShareFacebook X Pinterest
A hand interacts with a floating glass UI card composited over a kitchen scene in DaVinci Resolve

A convincing 3D floating UI in DaVinci Resolve needs more than a translucent rectangle. The card must hold its position in the scene, soften only the background visible through it, and let a hand pass naturally in front. Build those relationships in Fusion first, then add restrained highlights and animation. This workflow creates an Apple-inspired glass card while keeping the underlying setup understandable enough to adjust when the shot changes.

Plan the Shot and the Composite

Start with a clear idea of where the card sits and when someone interacts with it. A floating interface looks more believable when its size, angle, and movement remain consistent with the environment. If you are still planning your footage, consider how camera movement techniques change the viewer’s sense of depth before committing to an elaborate composite.

Plan the plate as carefully as the graphic. Use a B-roll filming shot list to decide the framing and the action before recording. For this effect, leave space for the card and rehearse where the fingertip will touch it. A short rehearsal makes it easier to spot framing problems before you build the composite.

The visual reference is glass-like separation between foreground controls and the scene behind them. Apple’s material design guidance describes this relationship through depth, layering, and visual hierarchy. For a filmed effect, translate that idea into readable text, a recognizable border, and background detail that remains visible but softened inside the card.

Start with a prepared, camera-tracked 3D scene; the steps below focus on card design and compositing. For hand isolation with Magic Mask, check the DaVinci Resolve Studio features before choosing that method. Keep a clean footage branch, the card artwork, its solid matte, and the foreground hand logically separate.

Build the Card in 2D First

Design the artwork before placing it in 3D. Working with a flat card makes border width, typography, spacing, and corner radius easier to judge. It also avoids involving the entire 3D scene every time you move a small graphic element.

Begin with a Background node whose alpha is set to zero, then use Merge nodes to assemble the visible pieces. Create the border using a Rectangle mask and another Background. Disable Solid on the rectangle, increase Border Width slightly, and adjust the shape and rounded corners. The interior should remain transparent at this stage.

Use a gradient for the border rather than a uniformly bright outline. Place the lighter area toward the upper left and the darker area toward the lower right. Lift the dark end enough to avoid a harsh black edge. This creates a simple visual cue that the frame has a surface catching light.

Add the divider line, small red, yellow, and green circles, a close symbol, and the main text as separate elements. Use ellipse masks for the circles and a Text node for the close symbol. Keeping these pieces separate gives you control over their timing later. Check their balance together before adding depth; a crowded card remains crowded after rendering.

The Roboto font family is one option for the card’s text. Check the lettering at the intended viewing size. Keep the label short enough to fit comfortably inside the border. Adjust the layout before moving into 3D, where perspective can make a crowded line harder to read.

Rounded floating UI card border and colored window buttons designed on a transparent Fusion canvas

Place the Card in a Tracked 3D Scene

Feed the completed card artwork into an ImagePlane3D node and connect that plane to the prepared 3D scene. 3D camera tracking reconstructs the shot’s camera motion in virtual space, allowing the card to move consistently with the scene.

Check the scene from more than one view. Match the card’s orientation to the environment and place it where it could physically exist. In the kitchen example, the card belongs above the island, not inside the countertop. A position that looks acceptable from the render camera can still reveal a geometry conflict from the top or side.

Return to the rendered view and scrub through the shot. Watch whether the card drifts, changes scale unexpectedly, or appears tilted against the room. Correct the plane’s position and rotation before adding blur or highlights. Surface styling can distract from a placement problem, but it cannot solve one.

Keep moving foreground objects out of the camera-track calculation where appropriate. Here, the hand is isolated early so it can be excluded from the track and reused in the final composite. That early preparation supports two different tasks without making the hand part of the static environment.

Fusion 3D scene showing the image plane and camera beside the card positioned above a kitchen island

Use a Solid Matte to Blur Only the Background

The glass effect depends on blurring the footage behind the card while keeping its graphics clear. A blur applied to the complete image would soften the lettering too. A blur masked by the border alone would miss the card’s interior. You need a filled version of the projected card as the effect mask.

First, make sure the card’s rendered branch contains the card itself. If footage is connected to the Camera Tracker scene as a background input, disconnect that feed before merging the card render over the footage. This keeps the card branch separate and avoids compositing another copy of the footage.

Copy the card scene and use Paste Instance to create a linked version for the matte. Instancing keeps the shared setup connected, which helps the visible card and its mask follow the same geometry. On the base Rectangle in the instance, de-instance only the Solid checkbox and enable it. The matte should now show a filled card silhouette instead of a hollow outline.

Connect that rendered solid shape to the Blur node’s mask input on the footage branch. Increase blur while watching the composite. The region under the card should soften, the scene outside its boundary should remain unaffected, and the text and border should remain clear. Confirm the mask follows the card throughout the shot.

If you plan to animate the rectangle’s shape, position, or size, establish that animation before constructing the dependent matte. Then check the linked result whenever you change the card. The purpose is to maintain one coherent silhouette across the artwork and every masked effect.

Filled white card matte next to a floating card with blurred background and the Fusion Blur controls

Make Repeated Resolve Commands Easier to Reach

Compositing involves repeated comparisons between the node setup and the final image. A desktop controller can put frequently used commands within reach. The Ulanzi D200X Creative Deck combines customizable LCD keys, three control dials, and an integrated 8-in-1 USB-C hub. Its practical role here is access to configured actions while you inspect the image.

Joel Van Beek’s custom Resolve layout includes render-cache toggling, full-screen viewing, subtitle activation, still export, and a silence-removal action. His dial mappings handle clean-feed switching and Fusion or color-effect bypass.

Start with the actions you already repeat, confirm the corresponding command works in your Resolve setup, and assign a small set you can remember. A Creative Deck editing workflow is most useful when its controls match actual habits. Test each assignment in the intended page and window context before relying on it during a project.

Ulanzi D200X Creative Deck on an editing desk with LCD keys and three rotary controls

Shape the Glass with Shadows and Highlights

Blur provides softness, but a restrained tonal treatment helps describe the surface. Add a dark gradient over the footage before the blur, limit it with the same card matte, and lower its blend until it adds depth without becoming a dark panel. Place the darker emphasis toward the lower right.

Build a second gradient for the brighter upper-left area. Use white, reduce its opacity, and keep it within the card. Compare the two layers together with the surrounding room. Their role is to support the illusion, not draw attention away from the message.

Check text against the brightest and busiest backgrounds it crosses. Keep enough separation between the lettering and the moving background to read the message comfortably. If the highlight washes over a label or the dark gradient hides a control, reduce that layer before adding more decoration.

Put the Hand Back in Front and Add a Ripple

A correctly tracked card can still look wrong when a hand passes behind it at the moment it should touch the surface. Reuse the isolated hand and merge it over the finished card composite. Apply a slight blur to its matte if needed to make the edge sit naturally against the footage. Review the fingertip closely around the contact frame.

Next, add the response to that touch. Place a Displace node after the card has been rendered into the scene but before the foreground hand is merged back on top. This order lets the interface react while preserving the hand as a separate foreground element.

Drive the displacement with a white Background and an Ellipse mask. Disable Solid on the ellipse, adjust its border, and soften the edge to form a ring with a gradual falloff. Position the ring at the fingertip’s contact point and use the filled card matte to restrict the displacement to the card area.

Animate the ring’s size and level around the touch. Start with a small ring at contact, switch its level off one frame earlier, and expand it over roughly 30 frames before fading it away. Adjust the duration to suit the rhythm of your shot. Ease the animation in the Spline editor and watch it at playback speed.

Fusion viewers and animation curves showing a hand overlapping the card during a masked ripple effect

Finish with Restrained Motion and Color

Once the geometry, blur, and occlusion work, add finishing details one at a time. A small camera shake at contact can reinforce the touch. Keep it subtle and align it with the contact frame. Add this finishing motion after the card’s placement and interaction work convincingly on their own.

For a subtle chromatic offset, add a Transform before the blur, disable processing for alpha, blue, and green, and scale the remaining red channel slightly. Restrict that treatment with the card matte. Keep it restrained enough that the typography and room still feel coherent.

Animate the card’s components independently when you want a more deliberate reveal. The border, colored buttons, close symbol, divider, and text can arrive with different timing rather than moving as one rigid block. Preview the result without the finishing effects too. If the card only looks convincing with heavy shake or distortion, revisit its placement and masks.

Choose Controls for the Adjustments You Repeat

Separate fixed commands from repeated adjustments. The comparison of editing dials versus keyboard shortcuts helps you decide which input suits each task. A command you already trigger confidently may need no new control. For a frequently repeated adjustment, first confirm that the software and controller can map the exact operation you want.

Check the Composite Before Export

Review the complete shot for drifting perspective, background blur escaping the card, clipped borders, and hand edges that pop between frames. Inspect contact at normal speed as well as frame by frame. Confirm the ripple stays inside the card and never distorts the foreground hand.

The finished effect depends on a shared silhouette and sensible layer order. Keep those relationships intact when revising the animation, and confirm the whole shot still reads clearly before exporting.

Common Questions About 3D Floating UI in DaVinci Resolve

Do I need DaVinci Resolve Studio for this workflow?

Yes, if you want to use Magic Mask for hand isolation. Blackmagic lists that tool among Studio’s features. The card-design and compositing principles are separate from the method used to obtain the hand matte. Start with a prepared tracked 3D scene; verify the tools available in your edition before planning the exact shot and workflow.

Why does my blur affect only the card outline?

The effect mask is probably using the hollow border instead of a filled card. In the instanced setup, de-instance the base Rectangle’s Solid checkbox and enable it, then inspect the rendered matte. A solid silhouette gives the Blur node an interior region to affect. Keep the visible border branch hollow so the artwork retains its transparent center.

Why does the hand still appear behind the card?

The foreground hand needs its own isolated branch merged above the card composite. Check both the matte and the merge order around the contact frame. Apply only enough edge softness to blend naturally. Keep the displacement below that final hand merge so the interaction changes the card without pulling the fingers into the ripple.

Can I animate the card after building its blur matte?

Yes, but check every dependent branch afterward. Establish the rectangle animation before building the dependent matte to keep the shared setup easier to manage. Instancing helps share settings, while the Solid override makes the matte different from the visible border. If an animation change breaks that relationship, the blur, highlights, or displacement can stop matching the card’s boundary.

Do I need a D200X to create this effect?

No. Create the effect with Fusion artwork, a prepared 3D scene, masks, and compositing nodes. A configured D200X can put repeated Resolve commands within reach while you inspect the result. Choose it according to the controls you use regularly, and keep familiar mouse and keyboard actions where they already work well.

Ulanzi D200H Stream Controller Ulanzi D200H Stream Controller €78,67 Ulanzi D200X Creative Deck Ulanzi D200X Creative Deck €101,09

Więcej do przeczytania

Zobacz wszystko

Zostaw komentarz

Pamiętaj, że komentarze muszą zostać zatwierdzone przed ich opublikowaniem.